Repainting your car can be fun. Any type of car can be repainted. You can repaint your car after an accident or even just to feel some change on the color of your car. One of the best places where you can have your car repainted is at BMW spray paint center. There are different types of methods that you can use to paint your car. One of the methods used at BMW spray paint center is the use of Rustoleum. The method bases its idea on the use of a foam paint roller to place as much layers as possible on your car. Painting a car is done by following some steps.
Below are the steps that BMW spray paint center.
Step 1 Preparation
You will need to have the items that are required when painting a car. A car is obvious to be one of the items. The next thing that you should have in mind is the place to have your car painted at. When you read the Active Motorwerke reviews, you will realize that the BMW service center is a good place to have ideas on the best way to get prepared when it comes to car painting. A painting air gun is the best item instead of a roller.
Step 2 Sanding
You need to have a 300 or 400 grit sand paper. It is good that you use some soap and a grease remover to cleaner out the paint. Then you should use the sand paper to remove the paint from the areas that are proving hard to sand. If the places are difficult to sand, you should use a scouring pad which works best on stubborn paints. Sanding at Audi service center is done with a touch of class.
Step 4 Applying Bondo
The step involves use of Bondo to hide any dents. After you have applied it, you should sand the place to maintain the same level of the body. Make sure that you cannot feel it after sanding the place.
Step 5 masking the car
You should mask some parts to avoid painting them. Some of the parts that you should mask include side windows, rear windows, windshield, mirrors, door handles, engine bay and tires. This will leave them the same way they were before painting the car.
Step 6 Prime painting
Prime painting is usually done to ensure that the regular paint does not does not come off. Since prime paint can cause cancer, always wear some mask when applying it. Prime coat does not have to be thick.
Step 7 Painting
After you have applied the prime, and it has dried up, you can start painting. Painting can be done using a hand spray gun or a roller. With a good mixture of the pain, painting should not be a hard task.
Step 8 finishing the painting
Place the trims back into the car. Avoid making scratches on the wet paint. Your painting should be perfect.
Painting becomes an easy task when you follow the right steps and you achieve great results. Visit http://activemotorwerke.com.au/smash-repair.